Air wrenches are widely used in many industries, such as automotive repair, heavy equipment repair, product assembly, major construction projects, installation of steel wire bushings, and any other place where high torque output is needed.
Pneumatic wrenches need to be repaired and maintained, so how do we change to clean the tool after use?
If it is a pneumatic wrench routine disassembly and maintenance cleaning, use Tanner water, rust removal oil, diesel oil, pneumatic oil, etc. can be used, it is necessary to note that after washing, it should be wiped over with a clean cloth, the strike group should be reapplied with appropriate grease (oil bath type should be added with new oil), the motor group after the whole machine is installed, to add pneumatic oil into the idle for a few seconds and then test, after the test and then add a few drops into the idle for two or three seconds, so that a small amount of oil to keep inside.
As for the usual maintenance, when you keep using the work, you can add pneumatic oil once every 15 minutes, and add a few drops of pneumatic oil into it before shutting down at work and turn it a few times to keep the pneumatic oil inside.
As a common tool for auto repair, heavy equipment repair, and product assembly, pneumatic wrenches play the following roles: major construction projects, installation of wire bushings, and any other place where high torque output is needed.
The emergence of pneumatic wrenches has brought us convenience, with compressed air as the power source, which is safe and convenient and highly popular. To use a pneumatic wrench for a long time, we have to learn to maintain it, and the most basic maintenance is to add lubricant to the pneumatic wrench.
Many people don’t know where to add the lubricant, in fact, the lubricant should be added at the air inlet of the pneumatic tool.
If the pneumatic wrench is routinely dismantled for maintenance and cleaning, you can use Tanner water, descaling oil, diesel oil, pneumatic oil, etc. What needs to be noted is that after washing, you should wipe over with a clean cloth, the strike group should be reapplied with appropriate grease (oil bath type should be added with new oil), the motor group should add pneumatic oil into the idle for a few seconds after the whole machine is installed and then test, and after the test, add a few drops into the idle for two or three seconds to keep a small amount of oil in inside.
The usual maintenance, continuous use of work, every 15 minutes to add a pneumatic oil can be, before the shutdown to add a few drops of pneumatic oil into a few turns to keep the pneumatic oil in the internal good.